- Home
- Blog Details
How to Select and Size an Electric Actuator: Torque Calculation Guide
- Industrial Automation / Actuators
- Oct 29, 2026
- 2 Views
How to Select and Size an Electric Actuator: Torque Calculation Guide
Selecting the right electric actuator is one of the most important decisions in industrial valve automation. An actuator must generate sufficient force or torque to operate a valve reliably under actual process conditions. Choosing an actuator based only on valve size, motor power or available product ratings can lead to operational problems, unnecessary mechanical stress and higher maintenance costs.
Proper electric actuator sizing requires understanding the valve's operating torque, pressure conditions, required movement, operating frequency and control requirements.
Whether you are automating a ball valve, butterfly valve, gate valve, globe valve or industrial damper, the correct actuator must match the mechanical and operational requirements of the equipment.
In this guide, we explain how to select an electric actuator, understand valve torque requirements, perform a practical torque calculation and identify the important specifications before making a selection.
1. Understand the Type of Valve Before Selecting an Actuator
The first step in electric actuator sizing is identifying the movement required by the connected valve.
Different valves use different operating mechanisms. Therefore, not every electric actuator is compatible with every valve.
Quarter-Turn Electric Actuators
Quarter-turn actuators produce approximately 90 degrees of rotational movement. They are commonly used with:
Ball valves
Butterfly valves
Plug valves
Industrial dampers
These actuators are suitable for applications requiring controlled rotary movement for opening, closing or positioning.
Multi-Turn Electric Actuators
Multi-turn actuators rotate through multiple revolutions to operate valves that require several stem rotations.
Typical applications include:
Gate valves
Sluice valves
Certain globe valves
Other multi-turn valve arrangements
They are commonly selected for industrial applications requiring controlled rotational output and suitable torque.
Linear Electric Actuators
Linear actuators generate straight-line movement or thrust rather than simply rotating a valve stem.
They are commonly used for:
Globe valves
Diaphragm valves
Control valve mechanisms
Dosing pumps
Equipment requiring linear movement
The appropriate configuration depends on the valve construction, stem arrangement, operating requirements and mounting interface.
Understanding the required movement prevents compatibility problems during installation.
2. Understand Valve Operating Torque Requirements
Torque is the rotational force required to move a valve from one position to another.
It is generally expressed in Newton metres (Nm).
The torque required to operate a valve is not necessarily constant throughout its movement. It can change depending on valve design, differential pressure, seating arrangement, friction, temperature and process conditions.
For accurate sizing, obtain the valve manufacturer's torque data wherever possible.
For a quarter-turn valve, the important operating torque values include:
Breakaway Torque: The torque required to initiate valve movement from its stationary position. This can be particularly important after a valve has remained closed or unused for an extended period.
Running Torque: The torque required to maintain valve movement after it has started.
Seating Torque: The torque required to bring the valve into its final closed position and achieve the specified sealing condition.
Unseating Torque: The torque required to move the valve away from its seated position.
A valve manufacturer may provide separate opening and closing torque values because operating requirements can differ in both directions.
ISO 5115:2023 identifies break-to-open, run-to-open, end-to-open, break-to-close, run-to-close and end-to-close torque values for part-turn valve assemblies.
Using only one general torque figure without checking the complete operating profile can result in incorrect actuator selection.
3. How to Calculate the Required Electric Actuator Torque
Once the valve's operating requirements are available, the next step is to determine the required actuator output torque.
A practical preliminary sizing method is:
Required actuator torque = Maximum valve operating torque × Sizing safety factor
The maximum valve operating torque should account for the highest relevant torque during opening and closing.
The sizing safety factor should be selected according to the applicable valve manufacturer's recommendations, project specifications and engineering requirements.
It should not be an arbitrary percentage applied to every application.
Practical Torque Calculation Example
Consider a hypothetical industrial butterfly valve with the following operating requirements:
Operating condition | Required torque |
|---|---|
Breakaway torque | 120 Nm |
Running torque | 85 Nm |
Seating torque | 95 Nm |
Closing torque | 110 Nm |
The highest specified operating torque is 120 Nm.
Assume the project engineering specification requires a 25% sizing allowance.
Calculation:
Required actuator torque = 120 × 1.25
Required actuator torque = 150 Nm
The selected actuator must provide at least 150 Nm of usable output torque under the specified operating conditions.
This is an illustrative calculation, not a universal sizing recommendation. The final actuator must also satisfy the valve's maximum allowable stem torque, coupling capacity and mounting limitations.
Why Is a Safety Factor Important?
A suitable sizing allowance helps account for variations in valve operating conditions and uncertainties in the application.
However, oversizing is not always beneficial.
An actuator producing excessive torque may damage the valve stem, coupling, gearbox or seating components.
The maximum allowable stem torque, commonly called MAST, must therefore be checked before finalising the actuator selection.
The actuator must have sufficient output to operate the valve while remaining within the mechanical limits of the complete valve assembly.
4. Important Factors That Affect Valve Torque
Calculating torque is not simply about identifying the valve's nominal size. Several operating conditions can influence the actual torque requirement.
Differential Pressure
Differential pressure is the pressure difference across the valve.
Higher differential pressure can increase operating torque, particularly in certain butterfly, ball and plug valve designs.
The valve torque data should represent the maximum specified operating differential pressure.
Fluid Characteristics
The type of fluid passing through the valve can affect friction and operating conditions.
Water, steam, oil, gas, chemicals and abrasive slurries may create different operating requirements.
Operating Temperature
High or low operating temperatures can affect seat materials, seals, lubrication and mechanical clearances.
The selected actuator and valve assembly must be suitable for the application's specified temperature range.
Valve Seat and Packing Friction
Seat material, packing compression and internal friction can significantly influence the force required to operate a valve.
Extended Periods Without Operation
A valve that remains in one position for an extended period may require additional initial torque when operation resumes.
The valve manufacturer's applicable on-demand correction factors should be considered.
5. Consider Gearbox Ratio and Output Torque
Industrial valve automation sometimes requires a supplementary gearbox to achieve the required output torque or operating speed.
A gearbox reduces rotational speed and increases the available output torque.
For an actuator connected to a supplementary gearbox:
Output torque ≈ Actuator torque × Gear ratio × Gearbox efficiency
For example, consider an actuator producing 100 Nm, connected to a gearbox with a 10:1 reduction ratio and an assumed mechanical efficiency of 80%.
Output torque = 100 × 10 × 0.80
Output torque = 800 Nm
This is an illustrative calculation. Actual gearbox efficiency and permissible loading must be obtained from the gearbox manufacturer.
The gearbox arrangement must also be checked for mounting compatibility, output speed, maximum torque and mechanical strength.
SDTORK provides multi-turn actuator configurations with supplementary bevel and full-turn worm gearboxes for applications requiring different torque and speed combinations.
6. Torque vs Thrust: An Important Difference
One common actuator selection mistake is treating torque and thrust as the same specification.
They represent different mechanical outputs.
Torque is rotational force, expressed in Nm.
Thrust is linear force, expressed in Newtons (N) or kilonewtons (kN).
Quarter-turn actuators are generally selected according to output torque, while linear actuator applications are commonly specified by their required thrust and stroke.
For example, a globe valve or diaphragm valve may require a specific linear thrust to operate its stem.
In these cases, the valve manufacturer should provide the required thrust, stroke and operating data.
The actuator must then be selected to meet those requirements without exceeding the permissible mechanical loading of the valve.
For multi-turn arrangements, the relationship between actuator torque and developed stem thrust depends on the stem thread, lead, friction and mechanical efficiency.
It should not be estimated using valve size alone.
7. Check Operating Speed and Duty Cycle
An actuator may have sufficient torque but still be unsuitable for an application if its operating speed or duty rating is incorrect.
Consider these requirements:
Required valve opening and closing time.
Number of operations per hour or day.
On-off or modulating service.
Continuous or intermittent operating requirements.
Motor thermal protection.
Starting frequency and permissible operating duration.
On-off applications generally operate between fully open and fully closed positions.
Modulating applications require frequent positioning at intermediate points. They may therefore need a different motor, control arrangement and duty specification.
The actuator's rated torque and operating speed must both be suitable for the intended duty.
8. Check Electrical and Environmental Requirements
Before finalising an electric actuator, verify the electrical and installation specifications.
Important parameters include:
Power Supply: Confirm the available voltage, single-phase or three-phase supply, frequency and permitted supply variations.
Control Requirements: Determine whether the application requires local operation, remote operation, PLC or DCS integration, on-off control or modulating control.
Position Feedback: Check whether open and closed indication, intermediate position indication or analogue feedback is required.
Enclosure Protection: Select an appropriate weatherproof or flameproof configuration based on actual site conditions.
Operating Environment: Consider ambient temperature, humidity, dust, corrosion, vibration and hazardous-area classification.
All these parameters affect the final actuator configuration.
9. Electric Actuator Selection Checklist
Before placing an actuator order, collect the following information:
Parameter | Information required |
|---|---|
Valve type | Ball, butterfly, gate, globe, etc. |
Valve size | DN or nominal size |
Movement | Quarter-turn, multi-turn or linear |
Operating torque | Maximum opening and closing torque |
Thrust | Required linear force, where applicable |
Differential pressure | Maximum operating pressure difference |
Temperature | Minimum and maximum process temperature |
Operating time | Required opening and closing time |
Duty cycle | On-off, inching or modulating |
Power supply | Voltage, phase and frequency |
Control | Local, remote, PLC or DCS |
Protection | Weatherproof or certified hazardous-area configuration |
Interface | Mounting flange, coupling and mechanical compatibility |
Providing this information to the actuator manufacturer makes the selection process more accurate and helps avoid costly specification changes.
10. Choosing the Right Electric Actuator from SDTORK
SDTORK Controls Pvt. Ltd. offers electric actuator solutions for different valve automation requirements.
Its product portfolio includes quarter-turn, multi-turn and linear electric actuators.
For example:
SD-1001-ECO Series: Weatherproof quarter-turn electric actuators with a published torque range from 30 Nm to 2,000 Nm, depending on configuration.
SD-3000 Series: Multi-turn electric actuators with published torque ratings starting from 20 Nm and extending to 300 Nm.
SD-3000 with Supplementary Gearboxes: Configurations offering higher output torque, including published ratings of 500 Nm, 700 Nm, 950 Nm and 1,200 Nm for specified variants.
SD-2000 Series: Linear electric actuators designed for globe valves, diaphragm valves and dosing pumps, with published thrust variants of 200 kg, 600 kg and 1,000 kg.
These specifications represent the published product range. The exact model must be selected according to the required output, speed, supply and application conditions.
Explore the SDTORK Quarter-Turn Electric Actuators, Multi-Turn Electric Actuators and Linear Electric Actuators to understand the available configurations.
Frequently Asked Questions
1. How do you calculate the torque required for an electric actuator?
Obtain the valve manufacturer's maximum operating torque, including the relevant opening and closing conditions. Apply the sizing allowance specified for the project to determine the minimum required actuator output torque.
2. Does valve size determine actuator torque?
No. Valve size alone is not sufficient. Torque also depends on valve design, differential pressure, seat material, friction, operating temperature and process conditions.
3. What happens if an electric actuator is undersized?
An undersized actuator may fail to open or close the valve, stall during operation, trip its protection or fail to achieve the specified sealing condition.
4. Can an electric actuator be oversized?
Yes. However, excessive output torque can damage the valve stem, coupling, gearbox or seating components. The maximum allowable stem torque must always be checked.
5. What is the difference between actuator torque and thrust?
Torque is rotational output measured in Nm, while thrust is linear output measured in N or kN. Rotary valve applications generally require torque sizing, whereas linear valve applications require thrust sizing.
6. Which electric actuator is suitable for a butterfly valve?
Butterfly valves commonly use quarter-turn electric actuators. The actuator must be selected according to the valve manufacturer's operating torque, required operating time, duty cycle and mounting requirements.
7. What information should I provide when requesting an actuator quotation?
Provide the valve type, size, operating torque or thrust, differential pressure, temperature, operating time, duty cycle, power supply, control requirements and environmental conditions.
Conclusion
Correct electric actuator sizing is essential for reliable industrial valve automation. Selecting an actuator based only on valve size or available torque ratings can lead to operational failures and unnecessary mechanical stress.
The most reliable approach is to obtain accurate valve operating data, calculate the required output using an appropriate sizing allowance, verify the maximum allowable stem torque and consider electrical, environmental and duty requirements.
At SDTORK Controls Pvt. Ltd., we offer quarter-turn, multi-turn and linear electric actuator solutions for a wide range of industrial applications.
Looking for the right electric actuator for your application?
Contact SDTORK to discuss your valve specifications and actuator selection requirements.
Related Posts
- Oct 31, 2026
- SDTORK
- 10




