- Home
- Blog Details
Electric Actuators for Globe and Control Valves: Selection and Applications
- Quarter-Turn Electrical Actuators
- Nov 06, 2026
- 2 Views
Electric Actuators for Globe and Control Valves: Selection and Applications
Globe valves are widely used in industrial piping systems where flow regulation, throttling and precise control are important. Unlike valves designed primarily for simple isolation, globe valves are often selected when a process requires controlled flow adjustment across varying operating conditions.
To automate this operation, an electric actuator must be matched to the valve's mechanical design, required movement, operating force and control requirements.
Selecting the right electric actuator for a globe valve is not simply about connecting a motor to a valve. It involves understanding valve stem movement, thrust requirements, control accuracy, operating cycles and the process conditions in which the equipment will work.
In this guide, we explain how electric actuators operate with globe and control valves, the types of actuators used, their applications and the important factors to consider during selection.
1. What Is an Electric Actuator for a Globe Valve?
An electric actuator is a motor-driven device used to automate the opening, closing or positioning of a valve.
In a globe valve application, the actuator operates the valve stem to move the valve plug relative to the seat. This movement controls the flow passage and allows the flow rate to be adjusted according to the process requirement.
Depending on the valve design, the actuator may need to produce:
Linear movement
Multi-turn rotational movement
Required thrust to move the valve stem
Accurate positioning for flow regulation
Reliable movement under process pressure
Globe valves are commonly used in applications requiring throttling or flow regulation. Therefore, the actuator must be compatible not only with the mechanical valve movement but also with the required control behaviour.
2. How Does an Electric Actuator Operate a Globe Valve?
The operation of an electric actuator with a globe valve involves converting electrical energy into mechanical movement.
The basic operating sequence is:
Step 1: Electrical Control Signal
The actuator receives a command from a local control station, PLC, DCS or other control system.
Depending on the configuration, the command may be an open/close instruction or a proportional signal for regulating valve position.
Step 2: Motor Operation
The actuator motor operates in the required direction.
The motor's rotational movement is transmitted through the actuator's gearing or mechanical transmission system.
Step 3: Conversion of Movement
Depending on the actuator design, the rotational movement may be converted into linear movement or transmitted through a multi-turn mechanism to operate the valve stem.
Step 4: Valve Position Adjustment
The valve plug moves relative to the seat.
This changes the opening through which the fluid passes and allows the flow to be controlled.
Step 5: Position Feedback and Control
In regulating applications, a position feedback system can help the actuator maintain the commanded valve position.
The control system continuously compares the required position with the actual position and adjusts the actuator when necessary.
This is particularly important when a globe valve is used as part of a process control loop.
3. Why Globe Valves Are Used for Flow Control
Globe valves are commonly selected for applications where flow regulation is more important than achieving the lowest possible flow resistance.
Their internal arrangement allows the valve plug to move toward or away from the seat, changing the flow passage.
This makes them suitable for applications such as:
Flow regulation
Pressure control systems
Temperature control loops
Steam systems
Process fluid control
Dosing and regulating applications
When an electric actuator is installed, the valve can be operated remotely and integrated into automated process control systems.
The combination of a globe valve and an appropriate actuator can help improve repeatability, reduce manual intervention and support more consistent process operation.
4. Types of Electric Actuators Used for Globe Valves
Not every electric actuator is suitable for every globe valve.
The correct actuator depends on the valve stem movement, required force, travel, control mode and mounting arrangement.
Linear Electric Actuators
Linear electric actuators produce straight-line movement.
They are suitable for valve designs that require direct linear movement of the stem or a linear operating mechanism.
Typical applications include:
Globe valves
Diaphragm valves
Dosing equipment
Linear control mechanisms
A linear actuator is often a suitable choice when the valve requires controlled stem movement and a defined stroke.
For example, the SDTORK SD-2000 Series is a linear electric actuator designed for applications including globe valves, diaphragm valves and dosing pumps.
The series offers different thrust options and is designed for on-off, inching and regulating applications, depending on the selected configuration.
Explore the SD-2000 Series Linear Electric Actuator.
Multi-Turn Electric Actuators
Multi-turn electric actuators are designed to provide multiple rotations of the output drive.
They are commonly used with valves that require several turns to complete their operating travel.
Depending on the valve design and transmission arrangement, multi-turn actuators may be used for gate valves and globe valves.
In applications where linear movement is required, a suitable transmission mechanism can be used to convert actuator rotation into the required thrust or stem movement.
The actuator must be selected according to the valve's actual operating mechanism and requirements.
Linear Transmission Unit Actuators
Some applications require higher thrust than a compact linear actuator can provide.
A linear transmission unit can be used with a suitable actuator to convert rotational movement into linear movement and deliver the required thrust.
SDTORK's SD-3000 + LTU Series is designed for linear transmission applications involving globe valves, gate valves, dosing pumps and selected rotary valves with lever mechanisms.
The series is designed for on-off and regulating duties, with multiple thrust options for industrial applications.
Explore the SD-3000 + LTU Series.
5. On-Off vs. Modulating Control for Globe Valves
The actuator control mode is another important consideration.
A globe valve may be used for simple isolation or for continuous flow regulation. The actuator must match the required operating duty.
On-Off Operation
In on-off operation, the actuator moves the valve between two defined positions:
Fully open
Fully closed
This configuration is suitable when the valve is primarily used to start or stop flow.
The actuator receives an open or close command and operates until the required limit position is reached.
Modulating Operation
Modulating operation allows the valve to move to intermediate positions.
Instead of operating only at fully open or fully closed positions, the actuator can adjust the valve opening according to the control requirement.
This is useful in applications involving:
Flow control
Temperature regulation
Pressure control
Process control loops
Variable operating conditions
A modulating electric actuator may receive a proportional control signal from a PLC, DCS or other control system.
For a globe valve used in regulating service, the actuator must be suitable for the required positioning accuracy, control response, operating frequency and mechanical duty.
For a detailed comparison, refer to our guide on Modulating vs On-Off Electric Actuators: Working, Applications and Differences.
6. Important Selection Factors for Electric Actuators Used with Globe Valves
Choosing an actuator for a globe valve requires careful evaluation of the valve and operating conditions.
1. Required Thrust
Globe valves generally require linear stem force to move the plug against the process conditions.
The required thrust depends on several factors, including:
Valve size
Differential pressure
Valve trim design
Stem friction
Seating force
Fluid characteristics
Operating conditions
The actuator must provide sufficient force throughout the required valve travel.
Do not select the actuator using valve size alone.
2. Valve Stroke
The actuator must provide sufficient travel to operate the valve from its closed position to the required fully open position.
The stroke length must match the valve stem movement.
Incorrect stroke selection may prevent the valve from reaching its required operating positions.
3. Control Accuracy
For regulating applications, positioning accuracy is important.
Consider:
Required control resolution
Position feedback
Repeatability
Response time
Control signal compatibility
Operating frequency
A valve used for continuous regulation may have different actuator requirements from a valve used only for isolation.
4. Operating Duty
The actuator duty cycle should match how frequently the valve operates.
An actuator used for occasional opening and closing may have different requirements from one operating continuously in a regulating loop.
Evaluate motor duty, thermal protection, operating cycles and the expected service conditions.
5. Power Supply
Check the required power supply and available plant electrical infrastructure.
The actuator configuration should be compatible with the available voltage, phase and frequency.
6. Mounting and Mechanical Compatibility
The actuator must be mechanically compatible with the valve.
Check:
Mounting arrangement
Stem connection
Coupling
Bracket requirements
Mechanical alignment
Stroke compatibility
A suitable mounting interface is essential for reliable operation.
7. Environmental Conditions
Industrial actuators may operate in environments exposed to moisture, dust, vibration, temperature changes and corrosive conditions.
The enclosure protection and construction should be selected according to the installation environment.
For hazardous areas, the required certified actuator configuration must be verified.
7. Applications of Electric Actuators with Globe and Control Valves
Electric actuators paired with globe valves are used across industries where automated flow regulation or process control is required.
Power Generation
Electric actuators may operate valves in selected auxiliary and process systems where flow or pressure regulation is required.
Applications may include utility systems, cooling circuits and selected fluid control processes.
Chemical and Process Industries
Chemical plants use control valves to manage the flow of liquids, gases and process media.
Electric actuators allow remote valve operation and integration into automated control systems.
The actuator and valve must be selected according to fluid characteristics, operating pressure, temperature and required control behaviour.
Water Treatment
Water treatment plants use automated valves to control flow through treatment, filtration, distribution and utility systems.
Electric actuators can support remote operation and automated control sequences.
Pharmaceutical Industries
Pharmaceutical and process manufacturing facilities may use automated valves to regulate fluid flow across different process stages.
The actuator selection must consider process requirements, installation environment and required positioning performance.
HVAC and Thermal Systems
Globe valves may be used in selected heating and cooling systems to regulate water flow.
Electric actuators can help maintain required operating conditions by adjusting valve position based on system demand.
Steam and Utility Systems
Globe valves are commonly associated with selected steam and utility control applications.
Actuator selection must account for the valve's operating force, differential pressure, control requirements and the surrounding environmental conditions.
8. Electric Actuator vs. Manual Operation for Globe Valves
Manual operation may be suitable for valves that are operated infrequently and do not require remote control.
However, manual operation can become less practical when valves are:
Located in difficult-to-access areas
Required to operate frequently
Part of an automated process
Used in a control loop
Required to respond to remote commands
Electric actuators allow valve operation through electrical commands and can be integrated into plant automation systems.
This can improve operating consistency, reduce the need for manual intervention and support centralised monitoring.
The decision depends on the process, automation requirements, operating frequency and overall system design.
9. Common Mistakes When Selecting an Electric Actuator for a Globe Valve
Selecting an Actuator Based Only on Valve Size
Valve size does not directly determine actuator thrust.
The required force must be evaluated according to valve design and process operating conditions.
Choosing a Rotary Actuator for a Linear Valve Without Checking Compatibility
Globe valves commonly require linear stem movement.
A rotary or multi-turn actuator may require an appropriate mechanical arrangement or transmission unit to operate the valve correctly.
Ignoring Modulating Duty
An actuator designed for occasional on-off operation may not be suitable for frequent regulating duty.
The control mode and operating frequency must be checked.
Underestimating Differential Pressure
The valve's operating force can change depending on the differential pressure across the valve.
Actuator selection should consider the actual process conditions.
Ignoring Stroke Requirements
The actuator travel must match the valve's required movement.
Insufficient stroke can prevent full operation.
Overlooking Position Feedback
In control applications, position feedback may be required for accurate monitoring and regulation.
The actuator configuration should support the intended control system.
10. Frequently Asked Questions
Which electric actuator is suitable for a globe valve?
The suitable actuator depends on the globe valve's movement, required thrust, stroke, operating conditions and control requirements. Linear actuators are commonly used for valves requiring direct linear movement, while multi-turn actuators with suitable transmission arrangements may also be used for specific designs.
Can an electric actuator be used for a control valve?
Yes. Electric actuators can be used with compatible control valves for on-off operation or regulating applications. The actuator must support the required positioning, thrust and control mode.
Are electric actuators used for modulating globe valves?
Yes. Electric actuators with suitable regulating functionality and positioning controls can operate compatible globe valves in modulating applications.
What is the difference between a linear and multi-turn actuator?
A linear actuator produces straight-line movement. A multi-turn actuator produces rotational movement over multiple turns. The appropriate type depends on the valve's mechanical operating arrangement.
What thrust is required for a globe valve actuator?
The required thrust depends on valve size, differential pressure, stem friction, seating requirements, valve design and operating conditions. The valve manufacturer should provide the required force or operating data wherever possible.
Can electric actuators be integrated with PLC and DCS systems?
Yes. Depending on the actuator configuration, electrical actuators can support remote operation, control signals, position feedback and automation integration with PLC or DCS systems.
Conclusion
Globe valves are widely used in applications requiring controlled flow, throttling and process regulation. Automating these valves with electric actuators can support precise positioning, remote operation and integration with industrial control systems.
The right actuator selection depends on the valve's mechanical movement, required thrust, stroke, operating duty, control mode and environmental conditions.
Linear electric actuators, multi-turn actuators and actuators equipped with suitable linear transmission units can all serve different globe valve applications, provided the mechanical and operational requirements are properly matched.
Selecting the actuator as part of the complete valve automation system, rather than as an isolated component, is essential for reliable industrial performance.
Looking for an electric actuator for your globe valve or control valve application?
Explore SDTORK's linear electric actuator solutions or contact our team to discuss the thrust, stroke, control requirements and operating conditions of your application.
Related Posts
- Nov 03, 2026
- SDTORK
- 10
Fail-Safe and Spring-Return Electric Actuators: Working Principle and Applications
Explore More- Oct 26, 2026
- SDTORK
- 10




